|
Smile-Bright
provides one
impression tray
for each set and
an extra package
of impression
material. The
impressions of
your teeth are
used to create a
custom model to
make your
personalized
whitening trays.
Clean and dry
hands before
beginning.
1.
Remove one
catalyst paste
and one base
paste and mix
the two together
by rolling and
kneading in your
hands until well
blended into one
colour. .Be as
quick as you can
as it does
harden quickly
2.
Roll out the
material the
width of the
tray. Press the
material and
shape into the
tray.
3.
Place the loaded
tray over the
upper teeth.
Using a mirror, Teeth should be
centred in the
impression
material. Press
firmly with your
fingers so you
can feel the
material flow
over your teeth
and gums.
Bite Down . The
impression
material will
extrude through
the holes in the
tray. Keep the
impression in
place for about
2 minutes, and
then remove
carefully. THE
TOTAL AMOUNT OF
TIME TO MAKE
YOUR IMPRESSIONS
IS ONLY 3
MINUTES EACH.
DO NOT remove
the moulds from
the trays.
4.
Check to make
sure that you
can see the
impressions of
your teeth in
the impression
putty. (Mainly
your
gingival/gum
line, In case
of error, you
may use the tray
again. An extra
set of
impression
material is
included.
5.
To make the
impressions for
the lower teeth,
repeat steps
2-4. Place the
tray over the
lower teeth.
6.
Let the trays
harden (about 20
minutes), then
rinse gently
under cold
water.
7.
Place the
impressions/Trays
in the
preaddressed
packing envelope
and mail back to
us. We will make
your customized
bleaching trays
in our certified
laboratory and
send them back
to you within
5-7 business
days.
Site Map |
Links |
Teeth Whitening
|
Tooth Whitening
|
History of Teeth
Whitening
© 1997 copyright
www.smilebrighternow.com
-
Teeth Whitening
for Less
|
